Home >> Applications

APPLICATIONS

OUR PRODUCTS ARE USED IN VARIETY OF APPLICATIONS. SOME OF THEM ARE MENTIONED BELOW.

DRYING

The process of drying requires removal of liquid from the mass. Drying process is included in various industries. To evaporate the liquid from mass it must be heated carefully considering factors like viscosity, relative humidity of surrounding and that of material and other physical specifications if any.

ANNEALING

A type of heat treatment process which is generally used to reduce hardness, increase ductility and also eliminate mechanical stresses induced by grinding machining. This prevents distortion during later stages of the process. It also helps to improve electrical properties in some cases.

SURFACE HEATING

Surface heating is mainly used in molding procedure. The work piece becomes softer than the inside. It can be also used to give uniform hardness to the work piece as per ones requirement. It is also called hardening process.

DEMOISTURIZER

In certain applications such as gas cylinder refilling, the metal cylinders needs to be demoisturized before refilling.

STORAGE HEATING

Storage heating applications are used in cold areas or with certain specific process requirements. The usual temperature range is generally very low. It enables the user to keep a certain amount of chemicals ready to use all the time.

HEAT TRACING

Heat tracing systems are used to maintain or raise temperature of pipes and vessels. Heating element is kept close to the pipes. The pipes are covered with insulation to contain heat loss.

PREHEATING AND MELTING

Preheating involves continuous and prolonged exposure to the material with different temperatures and different standings. The In order to achieve the perfect temperature profile we enable user to install various thermal cycles.

STABILIZATION OR STRESS RELIEF-CURING

To maintain desired parts in permanent condition stabilization treatment is used. Stress relief is mostly the last treatment; it ensures that mechanical properties don’t get adversely affected.

STORAGE

Once melted, our heating compartments can even be used to store the material. Simply by recirculating the mildly hot air material can be maintained in liquid state for long hours.  Some of our models also come equipped with a reserve tank that is fitted with heaters.